manualshive.com logo in svg

Fayat BOMAG BVP 10/36, Инструкция по эксплуатации

Поделиться
Скачать
Fayat BOMAG BVP 10/36 Скачать руководство пользователя страница 108

10.1  Final shut-down of machine

If the machine can no longer be used and needs to be finally shut

down you must carry out the following work and have the machine

disassembled by an officially recognized specialist workshop.

DANGER!
Danger to life caused by explosive gas-air

mixes!

–

Do not allow gasoline to come into contact with

hot components.

–

Smoking and open fire is prohibited.

–

Keep gasoline away from heat sources, sparks

and other sources of ignition.

–

Do not spill any gasoline.

–

Components that previously contained gaso-

line must not be cut with a cutting torch.

WARNING!
Health hazard caused by fuels and lubricants!

–

Safety regulations and environmental protec-

tion regulations must be followed when han-

dling fuels and lubricants

 

Ä

 Chapter 3.4 „Han-

dling fuels and lubricants“ on page 23

.

Protective equipment:

n

Working clothes

n

Safety shoes

n

Protective gloves

n

Safety goggles

1.

Empty the fuel tank.

2.

Drain engine oil from engine and exciter housing.

Disposal – Final shut-down of machine

 

BVP 10/36

 

108

Содержание BOMAG BVP 10/36

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды