Part No. SCAZ042891 1.3.4
27
E&OE
Operating Instructions Scarab M6
MAINTENANCE PROCEDURE
DAILY ACTIONS
BEFORE USE / AFTER USE WEEKLY
1. Check vehicle/body for safety. All lighting
equipment, tyres, fuel, oil, coolant, brake
fluid, windscreen wash and water tank level.
2. Check auxiliary engine, fuel, oil and coolant
levels
3. Check hydraulic oil level and inspect system
for signs of leaks. Check oil cooler is clean.
4. If vehicle not previously used by YOU, check
suction fan is clean.
5. Check brushes/skirts for wear or damage.
Remove entangled items, e.g. string are
strapping. etc.
6. Check suction nozzle flaps for
damage/correct ground clearance.
7. Check water spray jets for blockages.
8. Check that all equipment is securely stowed
and brushes are retracted.
9. Wash vehicle, particularly hopper screen,
surrounding ledges and area above. Leave
hopper door partially open, to allow air to
circulate.
10. Wash oil cooler, ensuring that the fins are
clean.
11. Lubricate as appropriate, all brush links,
pivot and nozzle wheel.
12. Remove/clean the L-P and H-P water filter
elements.
13. Clean the suction fan thoroughly, using the
scraper provided and high pressure water
(See Page 28).
14. Conduct a thorough inspection of the fan
assembly to verify its condition. Report any
defects (See Page 28).
15. Grease hopper ram (Top and bottom).
16. Visually check entire machine for
wear/damage.
17. Check wiring and hoses for security of
attachment and signs of wear are damage.
18. Check wear in suction tubes and deflectors
in hopper.
19. Check seals on hopper door, rear hatch and
suction tubes.
20. Check oil level in H-P pump, top-up if
needed.
21. Grease all points (See Page 34).
22. Check subframe to chassis fixing brackets
MAINTENANCE PROCEDURE
DAILY ACTIONS
BEFORE USE / AFTER USE WEEKLY
RECOMMENDED OPERATOR’S ROUTINE MAINTENANCE
It is important that the following routine maintenance procedures are carried out as directed. This will help to ensure that your Scarab sweeper
performs at the optimum level of safety and efficiency. Refer to the paragraphs immediately following this schedule and to the Table of Contents for
more detailed information. For chassis servicing/maintenance, refer to the manufactures information.
Содержание SCARAB M6
Страница 26: ...Part No SCAZ042891 1 3 4 26 E OE Operating Instructions Scarab M6 AREA MOST LIKELY TO SUFFER A BLOCKAGE ...
Страница 43: ...Part No SCAZ042891 1 3 4 43 E OE Operating Instructions Scarab M6 Operator s notes ...
Страница 44: ...Part No SCAZ042891 1 3 4 44 E OE Operating Instructions Scarab M6 Operator s notes ...
Страница 45: ...Scarab M6 Operating Instructions Part No SCAZ042891 1 3 4 47 E OE ...
