Fayat Group SCARAB M6, Техническое эксплуатационное руководство

Страница: 13 / 46

Part No. SCAZ042891 1.3.4 13 E&OE
Operating Instructions Scarab M6
Remote-control switch box functions
The hopper Raise/Lower and rear door Open/Close switches are located in the remote
control box. This is stowed in the cab, between the driver’s seat and door and is connected
to a socket via a coiled lead.
In the interest of health and safety and to avoid possible damage to the sweeper or
adjacent structures, it is essential that the remote hopper/door controls are not
activated from within the cab. Always use these controls outside of the machine
from a vantage point that affords a good view of the sweeper and its immediate
surroundings.
HOPPER RAISE - Press and hold down to raise the hopper.
The hopper prop must always be in the deployed position when the hopper is in the
raised position. Failure to do could result in serious injury.
HOPPER LOWER - Press and hold down to lower the hopper.
REAR DOOR OPEN - Press and hold down until the door is Fully open (at approximately
90° to the rear face of the hopper).
Ensure that the suction fan is OFF. The door cannot open while the fan is running due
to the low pressure created within the hopper.
REAR DOOR CLOSE - Press and hold down until the door is fully closed and the latching
cycle has finished. Only works when hopper is fully down.
The door prop must always be in the deployed position when working under an
open rear door.
OPTION
SAFETY INTERLOCK
This switch must be
pressed in and held
before any of the control
switches are operated.