Fayat Group SCARAB M6, Техническое эксплуатационное руководство

Страница: 10 / 46

Part No. SCAZ042891 1.3.4 10 E&OE
Operating Instructions Scarab M6
THE CANbus SYSTEM
The CANbus system comprises two control panels (main and auxiliary) an LCD monitor and a number of control nodes. The system controls and
monitors all sweeper functions and maintains a log of various operating parameters such as operating hours and any fault conditions that might occur.
Switches: The various types of switch function are grouped in two ways. Firstly they are colour coded as follows:
AMBER = Electrical functions such as lighting.
RED = Critical functions (e.g. Engage Hydrostatic Drive).
GREEN = Sweeping functions.
BLUE = Water Spray functions.
Each switch illuminates a function-related symbol on the LCD monitor (only installed equipment will be displayed). Each symbol is greyed-out until
its switch is activated. When a switch is activated the appropriate symbol will illuminate according to system status as illustrated.
Not selected
Pre-selected
Water pre-selected
Brush & water
pre-selected
Equipment working
Not selected
Pre-selected
Equipment working
Nozzle tilt selected
Not selected
Pre-selected
Equipment working
On dual sweep machines with
both side brushes operating, the
widesweep brush always swivels
to the side of the first selected
suction nozzle.
If this suction nozzle is cancelled
and the other side is still
operating, the widesweep brush
will swivel to that side.
WIDESWEEP WATER ON
SIDE BRUSH AND
WIDESWEEP WATER ON
WORKLIGHT ON
SHOWN IN THE WORKING
POSITION