Fayat Group DYNAPAC CC1300, Перевод оригинального руководства пользователя

Страница: 43 / 136

Machine description
4812162001_D.pdf 2021-12-14
Function description
No Designation Symbol Function No Designation Symbol Function
1. Starter switch Positions 1-2: Shut off position, key can be removed. 1. Starter switch Positions 1-2: Shut off position, key can be removed.
Position 3a: All instruments and electric controls are
supplied with power. Position 3a: All instruments and electric controls are
supplied with power.
Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor is
activated in the next position. Position 3b: Glowing. Hold the starter switch in this
position until the lamp goes out. The starter motor is
activated in the next position.
Position 3c: Starter motor activation. Position 3c: Starter motor activation.
2. Throttle control In forward position, the engine idles.
In backward position, the engine runs at full speed. 2. Throttle control In forward position, the engine idles.
In backward position, the engine runs at full speed.
3. Emergency stop When pressed, the emergency stop is activated. The
engine switches off and the brakes are activated.
Brace yourself for a sudden stop. 3. Emergency stop When pressed, the emergency stop is activated. The
engine switches off and the brakes are activated.
Brace yourself for a sudden stop.
4. Vibration On/Off. Switch Press once and release to switch vibration on. Press
again to switch the vibration off. 4. Vibration On/Off. Switch Press once and release to switch vibration on. Press
again to switch the vibration off.
5. Handbook compartment Pull up and open the top of the compartment for
access to handbooks. 5. Handbook compartment Pull up and open the top of the compartment for
access to handbooks.
6. Forward/Reverse lever The lever must be in neutral to start the diesel engine.
The engine cannot be started if the forward/reverse
lever is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. The roller moves forward
when the lever is moved forward, etc.
The speed of the roller is regulated in proportion to
how far the lever is moved from neutral. The further
the lever is from neutral, the higher the speed. 6. Forward/Reverse lever The lever must be in neutral to start the diesel engine.
The engine cannot be started if the forward/reverse
lever is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. The roller moves forward
when the lever is moved forward, etc.
The speed of the roller is regulated in proportion to
how far the lever is moved from neutral. The further
the lever is from neutral, the higher the speed.
7. Seat switch Remain seated at all times when operating the roller. If
the operator stands up during operation, a buzzer
sounds. After 4 seconds the brakes are activated and
the engine stops. 7. Seat switch Remain seated at all times when operating the roller. If
the operator stands up during operation, a buzzer
sounds. After 4 seconds the brakes are activated and
the engine stops.
8. Fuse box (on control column) Contains fuses for the electrical system. See under the
header "Electrical system" for functional descriptions of
the fuses. 8. Fuse box (on control column) Contains fuses for the electrical system. See under the
header "Electrical system" for functional descriptions of
the fuses.
9. Instrument cover Lowered over the instrument plate to protect the
instruments from the weather and sabotage. Lockable 9. Instrument cover Lowered over the instrument plate to protect the
instruments from the weather and sabotage. Lockable
12. Sprinkler, switch Upper position = switching on of flow of water to drum.
Intermediate position = Sprinkling switched off
Lower position = switching on of water to drum via
forward/reverse lever. The flow of water can be
controlled by means of the sprinkler timer (13). 12. Sprinkler, switch Upper position = switching on of flow of water to drum.
Intermediate position = Sprinkling switched off
Lower position = switching on of water to drum via
forward/reverse lever. The flow of water can be
controlled by means of the sprinkler timer (13).
13. Sprinkler timer Variable adjustment of water flow from 0-100%. Only
works when AUTO (12) is pressed in. 13. Sprinkler timer Variable adjustment of water flow from 0-100%. Only
works when AUTO (12) is pressed in.
33