Fayat Group DYNAPAC CC1300, Перевод оригинального руководства пользователя

Страница: 55 / 136

Operation
4812162001_D.pdf 2021-12-14
Check while warming the engine that the warning
lamps for the oil pressure (24) and charging (28) go
out.
Fig. Control panel
24. Oil pressure lamp
25. Brake lamp
28. Charging lamp
29. Glow lamp
28
29
24
25
The parking brake lamp (25) will remain on for as long
as the parking brake switch is activated.
When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature. When starting and driving a machine that is cold,
remember that the hydraulic fluid is also cold and
that braking distances can be longer than normal
until the machine reaches the working temperature.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning. Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Driving
Operating the roller
37
6
3
1
Fig. Instrument panel
1. Starter switch
3. Emergency stop
6. Forward/reverse lever
37. Speed selector
Under no circumstances is the machine to be
operated from the ground. The operator must
always be seated during all operation. Under no circumstances is the machine to be
operated from the ground. The operator must
always be seated during all operation.
Make sure that the area in front of and behind the
roller is clear. Make sure that the area in front of and behind the
roller is clear.
Release the parking brake and check that the parking
brake lamp goes off.
Set the speed selector (37) to High.
Check that the steering is working correctly by turning
the steering wheel once to the right and once to the
left while the roller is stationary.
When compacting asphalt, remember to turn on the
sprinkler system (12).
45