Fayat Group DYNAPAC CC1300, Перевод оригинального руководства пользователя

Страница: 60 / 136

Operation
4812162001_D.pdf 2021-12-14
Switching off
1
2
31
22
9
Figure. Instrument panel
1. Starter switch
2. Throttle control
9. Instrument cover
22. Panel for warning lamps
31. Parking brake
Set the speed selector (37) to Low, and allow the
engine to idle for a few minutes to cool down.
Activate the parking brake (31).
Check instruments and warning lamps to see if any
faults are indicated. Switch off all lights and other
electrical functions.
Turn the starter switch (1) to the left to the switched off
position. At the end of the shift, fold over the
instrument cover (9) and lock.
Parking
Chocking the drums
Fig. Drum part
1. Chocks
1
Never disembark from the roller when the diesel
engine is running, without first activating the
parking brake. Never disembark from the roller when the diesel
engine is running, without first activating the
parking brake.
Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
if the roller is parked on sloping ground. Make sure that the roller is parked in a safe place
with respect to other road users. Chock the drums
if the roller is parked on sloping ground.
Remember that there is a risk of freezing during
the winter. Empty the water tank. Fill antifreeze in
the engine's cooling system. See also
maintenance instructions. Remember that there is a risk of freezing during
the winter. Empty the water tank. Fill antifreeze in
the engine's cooling system. See also
maintenance instructions.
50