Fayat Group DYNAPAC CC1300 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 136

background image

Introduction

4812162001_D.pdf

2021-12-14

Introduction

The machine

Dynapac CC1300 is a self-propelled vibratory tandem
roller in the 4 metric tonnes class featuring 1300 mm
wide drums. The machine is equipped with drive,
brakes, and vibration on both drums.

Intended use

CC1300 has primarily been designed for the
compaction of asphalt, but has excellent compaction
capacity for reinforcement layers and bearing courses.
The roller is mainly intended for compacting asphalt on
streets and minor roads in towns. It has sufficient
capacity to follow a small asphalt paver.

Signal symbols and meaning

WARNING ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in death or serious injury.

WARNING ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in death or serious injury.

CAUTION ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in minor or moderate injury, damage to
the machine or property.

CAUTION ! Indicates potential hazardous
situation/procedure which, if not avoided, could
result in minor or moderate injury, damage to
the machine or property.

Safety information

It is recommended to at least train operators in
handling and daily maintenance of the machine
in accordance with the instruction manual.

It is recommended to at least train operators in
handling and daily maintenance of the machine
in accordance with the instruction manual.
Passengers are not allowed on the machine, and
you must sit in the seat when operating the
machine.

Passengers are not allowed on the machine, and
you must sit in the seat when operating the
machine.

The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.

The safety manual supplied with the machine
must be read by all roller operators. Always
follow the safety instructions. Do not remove
the manual from the machine.

We recommend that the operator reads the
safety instructions in this manual carefully.
Always follow the safety instructions. Ensure
that this manual is always easily accessible.

We recommend that the operator reads the
safety instructions in this manual carefully.
Always follow the safety instructions. Ensure
that this manual is always easily accessible.

1

«
...
9
10
11
12
13
...
»

Содержание DYNAPAC CC1300









































































































































Отзывы:

Нет отзывов

Похожие инструкции для DYNAPAC CC1300

Бренд: GBC Страницы: 8

Бренд: KAPSCH Страницы: 57

Бренд: PANDROL Страницы: 36

Бренд: LAWO Страницы: 459

Бренд: earline Страницы: 13

Бренд: Landoll Страницы: 70

Бренд: Landice Страницы: 19

Бренд: Landice Страницы: 7

Бренд: Qlight Страницы: 3

Бренд: qtran Страницы: 2

Бренд: Q-Optics Страницы: 2

Бренд: quadient Страницы: 188

Бренд: Radarsign Страницы: 16

Бренд: Vahle Страницы: 36

Бренд: Vahle Страницы: 20

Бренд: Vacon Страницы: 102

DeviceNet CompactPCI 1784-CPCIDS

Бренд: Allen-Bradley Страницы: 36

Бренд: Manley Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды