User Manual
AIC 324
Product Title:
AIC324
Document name: AIC324 User Manual
Manual version: 1.7.1
Copyright © 2018 Fastwel Co. Ltd. All rights reserved.
Revision Record
Revision number
Brief description of changes
Device name
Revision date
1.0
Initial version
AIC324
October 2011
1.1
Remarks related to the archives
AIC324
November 2012
1.2.
Section 1.2.3. has been updated
AIC324
November 2012
1.3.
Section 2.1.5. has been added
AIC324
February 2013
1.4.
Section 1.1.5 has been added, Annex B 2 has been
updated.
Compliance assessment
AIC324
April 2013
1.5.
Labeling has been revised. Weight has been specified.
AIC324
April 2013
1.6.
Weight of the device and weight of shipping containers has
been added.
AIC324
June 2013
1.7.
Section 1.1.5 has been revised.
AIC324
March 2014
1.7.1.
Compliance assessment.
AIC324
July 2018
Contact information
Manufactured by: Fastwel Co. Ltd:
Address:
108 Profsoyuznaya st.,
Moscow 117437,
Russian Federation
Tel.:
+7 (495) 232--1681
Fax:
+7 (495) 232-1654
Email:
Technical support: _
http://www.fastwel.com/
-
All information in this document is provided for reference only, with no warranty of its suitability for any specific purpose.
This information has been thoroughly checked and is believed to be entirely reliable and consistent with the product that
it describes. However, Fastwel accepts no responsibility for inaccuracies, omissions or their consequences, as well as
liability arising from the use or application of any product or example described in this document.
Fastwel Co. Ltd. reserves the right to change, modify, and improve this document or the products described in it, at
Fastwel's discretion without further notice. Software described in this document is provided on an “as is” basis without
warranty. Fastwel assumes no liability for consequential or incidental damages originated by the use of this software.
This document contains information, which is property of Fastwel Co. Ltd. It is not allowed to reproduce it or transmit by
any means, to translate the document or to convert it to any electronic form in full or in parts without antecedent written
approval
of
Fastwel
Co.
Ltd.
or
one
of
its
officially
authorized
agents.
Fastwel and Fastwel logo are trademarks owned by Fastwel Co. Ltd., Moscow, Russian Federation. Ethernet is a
registered trademark of Xerox Corporation. IEEE is a registered trademark of the Institute of Electrical and Electronics
Engineers Inc. Intel is a trademark of Intel Corporation. Pentium M and Celeron M are trademarks of Intel Corporation.
Microsoft is a trademark of the Microsoft Corporation. In addition, this document may include names, company logos and
trademarks, which are registered trademarks and, therefore, are property of their respective owners.
Fastwel welcomes suggestions, remarks and proposals regarding the form and the content of this Manual.
