User Manual
AIC 324
6 TRANSPORTATION
6.1 GENERAL REQUIREMENTS AND CONDITIONS
6.1.1 Transport packaging
The module should be transported in a separate packaging box (transport packaging) of the
manufacturing facility, which consists of an individual antistatic bag and a cardboard box.
It is possible to transport the modules, packaged in individual antistatic packages, in multiple
packaging (transport packaging) of the manufacturing facility.
The packaged modules should be transported in accordance with the shipping rules, operating with
this particular type of transport.
During handling and transportation operations, the packaged modules should not undergo sharp
pounding, falls, shocks and exposure to atmospheric precipitation. The packaged modules should be
stored in a carrier vehicle in such a manner which will prevent their moving.
ATTENTION: PROTECTION OF MODULE
’S TRANSPORT PACKAGING AGAINST DIRECT
EXPOSURE OF ATMOSPHERIC PRECIPITATIONS SHOULD BE ENSURED!
6.1.2 Transportation means
The modules can be transported by automobiles and by railway, without any speed limitations
and over all distances.
Transportation by air is allowed in heated and pressurized compartments over all distances.
6.1.3 Climatic conditions
The modules can be transported by the above transport types under the following climatic
conditions:
Ambient air temperature from -50 to
+60 °С;
Relative humidity is no more than 95 % at the temperature up to
+30 °С;
Atmospheric pressure is from 84 to 107 kPa (from 630 to 800 mm Hg.).
6.2 TRANSPORTATION CHARASTERISTICS
Dimensions:
Overall dimensions of the shipping container, no more than: 155x140x45 mm.
Weight
:
no more than 0.12 kg.
Weight of the shipping container, no more than: 0.1 kg.
