User Manual
AIC324
LIST OF TABLES
Table 1: Switching
……………...…………………………………………………………………….……………….........................14
Table 2: Light indication
……………………………………………………………………………………………………………….14
Table 3: XP9 Analog Connector Pinout
…….………………………………………………………………………………………..15
Table 4: Designation of the main functional outputs of the XP9 analog connector
……………………………………………..15
Table 5: Pinout of Digital Connector (XP12)
…….…………………………………………………………………………………..16
Table 6: Designation of the main functional outputs of the XP12 digital connector
……………….……………………………16
LIST OF FIGURES
Fig. 1-1:Main Components and Connectors Layout
….……………………………………………………………………………….11
Fig. 1-2:
Module’s Block Diagram ……………………………………………….……………………………………………………...12
All information in this document is provided for reference only, with no warranty of its suitability for any specific purpose. This information has been
thoroughly checked and is believed to be entirely reliable and consistent with the product that it describes. However, Fastwel accepts no responsibility
for inaccuracies, omissions or their consequences, as well as liability arising from the use or application of any product or example described in this
document.
Fastwel Co. Ltd. reserves the right to change, modify, and improve this document or the products described in it, at Fastwel's discretion without further
notice. Software described in this document is provided on an “as is” basis without warranty. Fastwel assumes no liability for consequential or incidental
damages originated by the use of this software.
This document contains information, which is property of Fastwel Co. Ltd. It is not allowed to reproduce it or transmit by any means, to translate the
document or to convert it to any electronic form in full or in parts without antecedent written approval of Fastwel Co. Ltd. or one of its officially
authorized agents.
Fastwel and Fastwel logo are trademarks owned by Fastwel Co. Ltd., Moscow, Russian Federation. Ethernet is a registered trademark of Xerox
Corporation. IEEE is a registered trademark of the Institute of Electrical and Electronics Engineers Inc. Intel is a trademark of Intel Corporation.
Microsoft is a trademark of the Microsoft corporation. In addition, this document may include names, company logos and trademarks, which are
registered trademarks and, therefore, are property of their respective owners. Fastwel welcomes suggestions, remarks and proposals regarding the
form and the content of this Manual.
