Fastora Fastora NAS T2, Руководство по установке оборудования

Страница: 13 / 24

FASTORA NAST2 Server Hardware Installation Guide
C h a p t e r 2
Installation Procedures
2.1 Preinstallation Checklist
In addition to this installation guide, make sure you have the following items,
The FASTORA NAS server appliance
Power cord
Utility CD (including this installation guide)
Mounting screws for disk drive and screws used in this appliance for spare
Hardware Installation Guide
Quick installation guide
FASTOR NAS
Software User’s Manual
If you ordered options for the appliance, this package might contain additional hardware or
publications for those options.
2.1.1 Installing a hard-swappable hard drive
The FASTORA NAST2 server has two hot-swappable drive bays, those can be installed 3.5” IDE
hard drive each. You don’t’ need to turn off the appliance when replacing a failed hard drive. For
each hot-swappable drive you plan to install, there must be a hot-swappable drive tray attached.
The hard drive must be 3.5” ATA66/100/133 IDE compliance. The hot-swappable drive tray
connects to the backplane. The backplane is the printed circuit board behind the bay.
Attention:
1. Do not use any other drive tray which is not designed for this appliance, or a serious damage
might cause.
2. For best flexibility, the appliance is designed to fit most types of hard drive form Hard disk
drive vendors. But each of them might have slightly different mechanical dimension for
installation, we strongly recommend use the same type hard drive or with the same
dimension. Review the section 2.3 for more detail.
Installation Procedures
7