FASTORA NAST2 Server Hardware Installation Guide
Figure 2.1.1.3
1. Open HDD door, press plastic locker trigger of tray downward to release tray handle.. See
figure 2.1.1.1
2. Remove the empty hot-swappable drive tray by pulling the tray handle. Slide the tray off the
tray bay. See figure 2.1.1.1
3. Disengage 4 screws that firmly mount the HDD drive onto the tray drive bay. Disconnected the
cable of old or damage HDD drive from the tray backplane. Then, pull the HDD drive out of the
tray drive bay. See figure 2.1.1.2
4. Mount the new HDD drive(s) into the empty slot. Connect the cable of tray backplane into new
HDD. Affix the HDD drive by mounting 4 screws on each side of the drive bay. See figure
2.1.1.2
5. Gently push the hot-swappable drive tray into the hot-swappable drive bay until the tray
connects to the backplane.
6. Push the drive tray handle toward to the close position. See figure 2.1.1.3.
Installation Procedures
9
Содержание Fastora NAS T2
