background image

 

Safety Approvals 

 

CE Marking 

 

FCC Class A 

FCC Compliance 

This equipment has been tested and complies with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. If not installed and used in accordance with 
proper instructions, this equipment might generate or radiate radio frequency energy and cause 
harmful interference to radio communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measurers: 
Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver. 
Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

Consult the dealer or an experienced radio/TV technician for help. 
Shielded interface cables must be used in order to comply with emission limits. 

 

iii 

Содержание Fastora NAS T2

























Отзывы: