8
PREPROGRAMMING CONFIGURATION
CONTROLLER BOARD DIPSWITCH OPTIONS
Switch #
Description
Operation
ON
to enable bill acceptor escrow which prevents more than one bill
to be inserted per vend
1
ESCROW
OFF
to disabled escrow
ON
to make selection 2 characters
2
SELECTION
DIGITS
OFF
one character
ON
to enable force vend (customer must attempt to make a vend);
p
revents the unit from being used as a change machine. The machine will not
advance further into the vend cycle until the customer makes a selection.
3
FORCE VEND
OFF
allows change to be dispensed using the coin return.
4
NOT USED
No function
5
AUTO-TEST
Used only for factory testing
6
NOT USED
No function
Clearing the Memory -
Even after computer boards or chips have been changed, legacy
selection numbers and bin locations may still exist in memory. To completely clear the
machine
’s
memory:
1. Power down the machine.
2. Turn all dipswitches to
“on”
on the computer board.
3. Power up the machine.
4. The screen will display
“Factory Test Press Any Key”.
Press a key and the screen will change
to
“Testing External RAM”
for about one second.
5. The screen will display
“Checking Real Time Clock”.
Disconnect the power and return the
dipswitch settings to normal.
PROGRAMMING
INTRODUCTION
The
machine
comes from the factory without any preset selection numbers or bin locations in
memory. All information is entered during initial setup and programming. Programming is
completely menu driven. Simply scroll through the menus until the desired function is reached.
Once inside a menu function, the computer will prompt the user to enter the required information.
Programming Menus can be accessed in Service Mode. The machine enters Service Mode every
time the cabinet door is opened. A list of menu items can then be viewed on the digital display by
pressing the “*Next” key on the customer keypad. In the event that there are bin and sold out
errors in memory, the errors are displayed before the programming menus.
Note:
if the machine is programmed in one location and transported to another, (for example in
your warehouse) it is important to re-level the machine at the new location and perform test vends
on each selection. Reprogram/edit bins where required.
Содержание F820
Страница 1: ...F820 Service and Parts Manual Ver FC031504...
