Chapter 7: Process the Scan Project
Processing is a series of manipulations to the scan data in a project that improve the quality of the scan.
This chapter will give you a description of how to process a scan project.
Processing
The usual case is to process an entire scan project, though you can also process single scans.
1. Select the project you want to process. (Tap
Scan Projects
,
Select
, and tap the project you want to
process.) You can also open a project first, and then select just one scan to process. Select the project
that contains the scans you want to process.
2. Tap
Process
.
3. Choose the processing options you want to use. Two presets are available
Fast Processing
and
Accurate Processing
. Choose one, modify as necessary, and select
Start processing
. See below for a
description of the different processing options.
User-Defined Processing
Figure 7-1 Processing settings
Plane Detection
On
switches on detection for all processing.
Auto
switches on plane detection only if it was switched on
when the scan was created.
Replay
If scans have already passed some processing steps, Replay restarts the processing from the beginning.
Processing is then executed with higher precision than was done during capturing.
FARO Freestyle 2 User Manual
Chapter 7: Process the Scan Project
FARO Freestyle 2 (August 2020)
Page 36 of 58
