21
Revision date: 09.25.18
111628W
1
ASSEMBLE MAIN FRAME: Level and Secure Frame to the Wall (continued)
Assembly Instructions
5. After setting the slope (end-to-end) and
leveling the end and mid supports (side-to-
side), take the six (6) 112322 brackets and
install in the locations shown to secure the
frame to the wall.
Verify that the fasteners
bite into solid substrate.
Frame must be
securely fastened to the wall to prevent
tipping and movement during operation and
as fodder is harvested.
WARNING:
This is not a free-
standing frame! You must secure this
frame to the wall using the appropriate
customer-supplied fasteners and 112322
brackets. Contact the services of a qualified
contractor for assistance, or call your
sales representative for additional fastener
information and to purchase fasteners. DO
NOT POPULATE THE FODDER CHANNELS
ON A FRAME THAT HAS NOT BEEN
PROPERLY SECURED TO THE WALL!
NEVER CLIMB ON THE FODDER FRAME!
Customer-Supplied Fasteners:
Walls and
supporting members are constructed from
many different materials. For this reason,
it would be difficult to provide fasteners to
accommodate all possibilities. Contact a
contractor or your sales representative to
purchase fasteners that are appropriate for
your wall.
6. Install the remaining outer tube.
7. After anchoring the frame install the two (2)
corner braces.
ATTENTION:
Fasteners used to secure the
112322 brackets to the wall are not included
and are supplied by the customer.
After securing the frame to the wall using customer-supplied
fasteners, install one FA4482B Tek screw through each
112322 bracket and into the wall mount tube.
Step 6
112322
Brackets
Wall-
Mount
Tube
Customer-Supplied
Customer-
Supplied
FA4482B Tek
Screw
