Manual
TRITON 300 P
19
│ 36
*The drawbar needs to be lifted by the tractor shoulders when the machine is not equipped with the drawbar
piston-rods with a Cat. 3 three-point hitch.
LEVER FOR SWITCHING ADDITIONAL TOOLS **
**Applies in the case when the machine is equipped with a hydraulic supporting leg. In the basic version, the
supporting leg is pulled out manually and the blue circuit is connected directly to control the levelling discs.
LEVER FOR SETTING THE MACHINE FOR AGGREGATION
LEFT POSITION
The
BLUE
circuit is set to
control the supporting leg.
RIGHT POSITION
The
BLUE
circuit is set to
control the lifting of the
levelling discs.
LEFT POSITION
The
YELLOW
circuit is set in
the initial condition, i.e.,
both the axle and the
drawbar piston-rod are
controlled at the same time.
RIGHT POSITION
The
YELLOW
circuit is set for
machine aggregation, i.e.,
the axle does not move,
only the drawbar piston-rod
does. The operator is thus
able to adjust the height of
the hitch as needed during
the aggregation of the
machine to the pulling
vehicle.
