Manual
TRITON 300 P
17
│ 36
2.1
DESCRIPTION OF MACHINE HYDRAULICS
▪
When disconnecting the quick-couplers, both valves on the drawbar must be closed in the same way as
for road transportation.
▪
Connect the hydraulics only when the hydraulic circuits of the machine and the tractor (aggregate) are in
a pressure-less condition.
▪
The hydraulic system is under high pressure. Regularly check for leaks and immediately remove obvious
damage of all lines, hoses, and pipe unions.
▪
When seeking and removing leaks, use only the suitable tools.
▪
For connecting the hydraulic system of the machine to the tractor, use the plug (on the machine) and
the socket (on the tractor) of the quick-couplers of the same type. Connect the quick-couplers of the
machine to the hydraulic circuits of the tractor so that the
YELLOW
DUST CAPS
for lifting the machine on
the axle are on one control circuit, the
GREEN
DUST CAPS
for setting the front disc section are on the
second control circuit, the
BLUE DUST
CAPS
for controlling the rear packer discs are on the third control
circuit, and the
WHITE DUST CAPS
for controlling the setting of the working depth of the machine on the
rollers is on the fourth control circuit.
In order to prevent accidental or foreign person (children, passengers) caused movement of the
hydraulics, the control switchboards on the tractor must be secured or blocked in the transport position.
Parts of the hydraulic system of the machine, which are under pressure, are forbidden to disassemble.
Hydraulic oil that penetrates the skin under high pressure causes severe injuries. In case of injury, seek a
physician immediately.
YELLOW DUST CAPS
–
controlling the transport axle
1 STRAP
–
lifting the machine into the transport position, i.e. axle is
lowered down
2 STRAPS
–
the machine is lowered to the working position, i.e. the axle
is lifted up from the ground
GREEN DUST CAPS
–
controlling the position of the front disc section
1 STRAP
–
lifting the front disc section
2 STRAPS
–
lowering the front disc section
BLUE DUST CAPS
–
controlling the position of the rear packer discs
(supporting legs
–
when included)
1 STRAP
–
lifting the packer discs
2 STRAPS
–
recessing the packer discs
WHITE DUST CAPS
–
setting the depth
1 STRAP
–
lifting the rollers (increasing the working depth)
2 STRAPS
–
lowering the rollers (decreasing the working depth)
