Manual
TRITON 300 P
32
│ 36
MAINTENANCE PLAN
Perform the planned maintenance according to the instructions
:
Maintenance Task
Daily
(season)
Once a
week
Before
season
After
season
Time
interval
Electric cables
Check for any damage, replace if needed
X
X
Safety measures
Lighting and safety hatched boards
–
check the
condition, function and cleanliness
X
X
Hazard and safety labels
–
check that they are
installed and legible
X
Machine lubrication plan
Drawbar joint / lifting loop
–
grease
X
X
Handbrake bolt
–
grease or suitable oil
X
X
Axle bearings
–
grease with Lithium content
–
check, refill if needed
X
After season
Entire machine
•
Treat and clean the machine; do not spray oil or similar agents on the plastic parts
•
Spray the piston-rods of the hydraulic cylinders with suitable anti-corrosion agents
•
Check the tightness of all bolt and plug-in connections (see the torque chart)
•
Check for any damage of the electric cables and replace if needed
Brake system
•
Preserve the anti-freeze fluid for air-brake systems (about 0.1l), ethanol-free, before the last ride,
use fluid recommended by the tractor manufacturer.
•
Secure the machine against movement by Scotch blocks.
•
Release the parking brake, release air from the air nozzle and close the brake lines.
The service brake must be released during winter so that it does not get stuck on the brake drum
Points of lubrication
Grease the points of lubrication according to the lubrication plan, use grease
KP2P-20 Likx, under DIN 51 502
!!! PREVENTION means removing the problem according to the plan,
outside the season, without stress and comfortably before a secondary
problem, an accident or a health hazard arises.
