Manual
EXCELENT Premium 6; 8
6
│
52
A.
GENERAL INTRUCTIONS FOR USE
A.1
(x)
The machine is produced in compliance with the latest technological conditions and approved safety
regulations. However, the use of the machine may still cause injuries to the user or third persons or
damage to the machine or occurrence of other material damages.
A.2
(xx)
Use the machine only in a technically unexceptionable condition, in compliance with its purpose, with
awareness of potential risks and observance of safety instructions stated in this manual!
Immediately eliminate all defects that could have a negative impact on safety!
A.3
(7)
The machine may only be operated by a person authorized by the owner under the following
conditions:
(8)
He or she must have a valid driving licence in the relevant category,
(9)
He or she must be verifiably informed on the safety rules of working with the machine and must
have command of the operation of the machine in practice,
(10)
The machine must not be operated by a minor (minors),
(11)
He or she must understand the meaning of warning symbols placed on the machine. Respecting the
symbols is important for a safe and reliable operation of the machine.
A.4
(12)
Maintenance and service repairs may only be performed by a person:
(13)
Authorized by the owner,
(14)
Trained in an engineering field with the knowledge of repairs of similar machinery,
(15)
Verifiably informed on the safety rules of working with the machine,
(16)
With a driving licence in the relevant category for repairs of the machine attached to a tractor.
A.5
(17)
The operator of the machine must ensure safety of other people during the work with the machine and
its transportation.
A.6
(18)
The operator should not be on the construction of the machine during the work in the field or during the
transportation
the operator must control the machine from the tractor cabin.
A.7
(19)
The operator may only enter the construction of the machine when the machine is off and secured
against movement only in order to:
(20)
adjust the working parts of the machine,
(21)
repair and maintain the machine,
(29)
release or secure the ball valves of the axle,
(27)
secure the ball valves of the axle before tilting the side frame,
(28)
adjust the working parts of the machine after opening the side frame.
A.8
(xxx)
When climbing onto the machine, do not step on the tyres of the rolls or other revolving parts as they
may roll over and you can seriously hurt yourself if you fall down.
A.9
(22)
Any changes or adjustments of the machine may only be performed with a written consent of the
producer. The producer is not responsible for any potential damages occurred as a result of non-
compliance with this instruction. The machine must always be equipped with the prescribed accessories,
equipment and gear including the safety labels. All warning and safety signs must be always legible and at
their positions. They must be replaced if damaged or lost without delay.
A.10
(23)
The instructions for use and the requirements of the safety at work must be always available to the
operator.
A.11
(24)
When operating the machine, the operator must not consume alcohol, medicine, narcotic and
hallucinogenic substances that reduce attention and coordination abilities. If the operator has to take
medicine prescribed by the physician or if he or she uses over the counter medicine, he or she must be
informed by the physician whether he or she is able to reliably and safely operate the machine under these
circumstances.
PROTECTIVE EQUIPMENT
In order to operate and maintain the machine, you need:
Close-fitting clothing
Protective gloves and goggles for protection from dust and sharp parts
of the machine
