Farmet EXCELENT PREMIUM 6, Инструкция по эксплуатации

Страница: 13 / 52

Manual
EXCELENT Premium 6; 8
13
│
52
(12)
Requirement for the air system of the tractor
(if the machine is equipped with brakes)
(13)
circuit of braking of the machine
axle
(16)
Pressure in the circuit
min.6 bar – max. 15 bar, 1
clutch head for single
circuit brakes
(x)
Requirement for the electric system of the
tractor
(x)
connection of the electronic system
of the machine
12V / 40 A
+ brown + blue
 Connect the machine with the carrier bar TPM to the lower arm of the tractor TPM and secure the TPM
arms with pegs against disconnection.
When connecting the machine, there must not be any people in the area between the machine
and the tractor
.
3.2. CONNECTING THE HYDRAULICS

Connect the hydraulics only if the hydraulic circuits of the machine and the tractor (aggregate) are without
any pressure.
 The hydraulic system is under great pressure. Check regularly for leakages and immediately eliminate any
visible damage to all distribution, tubes and screw joints.

When checking for and eliminating leakages, use appropriate equipment.
 Use the plug (on the machine) and the socket (on the tractor) of the same type of snap coupling when
connecting the hydraulic system of the machine to the tractor. Execute the connection of the snap coupling
of the machine to the hydraulic circuits of the tractor according to Tab. 5.
Tab. 5 - Connection of the hydraulic circuits and setting up the flow of oil
Circuit Plug Cover colour Oil flow direction Flow of oil
Hydraulic motor of the fan
ISO 12,5 red pressure tube
20 – 40 l/min
ISO 20 black open waste
Controls of the machine
hydraulics
ISO 12,5 blue pressure tube
50 – 60 l/min
ISO 12,5 white reverse tube
In order to rule out unintentional movement of the hydraulics or movement caused by third persons
(children, passengers), the controlling distributors in the tractor must be secured or blocked and the
controlling unit switched off if the machine is not used or if it is in the transport position.
The parts of the hydraulic system of the machine that are under pressure must not be disassembled.
The hydraulic oil causes serious injuries when it penetrates the skin under the high pressure. In case of
injury, immediately seek a doctor.
3.3. CONNECTING THE ELECTRONIC UNIT

Connect the electronic unit of the machine only when the tractor is standing still and is secured against
movement and intervention by third persons.
 The requirements for the connection of the electronic unit are stated in Tab. 6./p. 14

Put the display unit to a place in the tractor where it will not obstruct the driver’s view and where it will be
in the visual field of the operator, connect it to the power voltage and attach it to the socket on the pole of
the sowing machine.