Farmet DUO, Руководство по эксплуатации

Страница: 18 / 48

OPERATING MANUAL
OILSEED SCREW PRESS FARMET DUO
Page 18 of 48
Press capacity – the quantity of the pressed material entering the press per unit of time,
usually stated in kilograms per hour
3.2 OPTIONAL EQUIPMENT
Electrical Equipment with Frequency Convertor
The frequency convertor is installed directly on the motor terminal block. There are control
buttons on the frequency convertor for switching on and controlling the motor revolutions.
More information is available in the
NORDAC SK 205E Frequency Convertor Operating
Instructions .
Electrical Equipment without Frequency Convertor
The electromotor starter allows starting and stopping the motor (including emergency
stop).
Heating Sleeve
It warms up the die before the actuation of the press to ensure better start-up.
Heating sleeve with temperature regulation
It allows heating and stabilization of the temperature of pressing device to the desired
temperature.
Wooden Pedestal under the Press
The pedestal under the press is made from solid stained timber. It stabilizes the press
during operation.
Table under the Press
The metal pedestal under the press ensures stability during operation.
Service Tools
Tools required for disassembling and cleaning the press. It contains a hook spanner, a box
spanner and a cleaning preparation.
Hopper above the Press with Capacity of 20L
A metal hopper above the DUO screw press with the capacity of 20 litres. It is an extension
above two hoppers that are included in the pressing mechanism.