Farmet DUO, Руководство по эксплуатации

Страница: 26 / 48

OPERATING MANUAL
OILSEED SCREW PRESS FARMET DUO
Page 26 of 48

After you press the empty (material falls from the output of the press), mount bracket
and nozzle and press it once again

After starting, check the temperature, or identify a possible source of overload
6.4 “OILING UP” THE PRESS
If the press is running when in operation but the seeds stay in the hopper, oil is not flowing
(or only little) and cakes are not falling out of the discharge nozzle, the oil has been “oiled
up”. Remove the defect in the following way:

Stop the feed of seeds

Clean the exterior side of the openings for the oil discharge in the die. Use the cleaning
preparation (included in the service tools)

Start up the press according to Chapter 5.5
If the aforementioned procedure does not help, execute the following:

Stop the press

Disassemble the nozzle and the nozzle holder

Run the press shortly to empty it (the material will fall out of the press)

When the press is empty, turn it off and install the holder and the nozzle and start up
the press again
If the problem recurs, disassemble and clean the die.
6.5 OPERATING DIARY
We recommend keeping written records of the operation of the Equipment and reporting
all exceptional circumstances and failures and situations leading to failures and handing over
the operating diary to the following shift. Record information about the operation at least once
per shift:

Report exceptional circumstances