Farmet DUO, Руководство по эксплуатации

Страница: 29 / 48

OPERATING MANUAL
OILSEED SCREW PRESS FARMET DUO
Page 29 of 48
8. OPERATING DEFECTS
In the table below, the solutions of problems, which may occur during the equipment
operation, are described. The equipment must always be properly installed and used in
accordance with this user manual. In case of uncertainties concerning the use of the
equipment, contact the service centre.
Table 2
Operating problems Probable causes Solutions
The press stops Press overload Proceed according to Chapter 5.3
The press is running
but seeds stay in the
hopper and cakes do
not fall out
Oiling up of the press Proceed according to Chapter 5.4
Noise from the
pressing mechanism
Penetration of a foreign object
in the press
Shut down the press, check the
individual components and replace
damaged parts
Noise from the
gearbox / motor
Gearbox / motor failure Contact the service centre
The press cannot be
activated after shut-
down
Hardened material in the press
Clean the working part of the press
according to
Chapter 5.5.1
Press overheating
Out-of-phase thermal
protection
Let the press cool down for several
minutes, then proceed according to
Chapter 5.3