Farmet DISKOMAT 5 PS, Руководство по эксплуатации

Страница: 39 / 46

MACHINE MAINTENANCE AND REPAIRS
MAINTENANCE PLAN
Perform the planned maintenance according to the instructions:
Maintenance Task Daily
(season) Once a
week Before
season After
season Time
interval
Bolt connections
Visual inspection of bolt and hydraulic joints,
tighten any loose joints using a corresponding
torque (see the torque chart)
Towing lug – check, tighten if
needed
M 16 — 10.9. – 300 Nm
M 20 — 10.9. – 560 Nm
Wheels – tighten all wheel nuts
• First time: after 10 hours of operation
• Wheel replacement : after 10 hours of
operation
M 18 x 1,5 – 300 Nm
M 20 x 1,5 – 400 Nm
M 22 x 1,5 – 500 Nm
Brake system
Brake line and hoses – check the function,
tightness, mounting and clamping, or breaking
Brake components – check the function,
tightness, mounting
Air nozzle – drain using the draining valve
Draining valve – check the function, clean and
replace sealing
Pipe filter – clean
Brake/parking brake – check the function,
escapement setting 25-45mm
Brake lining – check the condition of the brake
lining, min. thickness of 3mm
Wheels/axle
Checking the tyre pressure
Transport axle DSK 5–8 PS – 19,0/45-17 14 PR,
pressure 400 KPa
Tracing wheels DSK 5 – 8 PS – 10,0/75 – 15,3
14 PR, pressure 550 kPa
Axle – Double rubber-tyred roller DSK 5 – 8 PS
– 10,0/75 – 15,3 10 PR, pressure 400 kPa
Transport axle bearings – check and adjust
allowance if needed (in the workshop)
39 | 46