8.3 Folding and unfolding of the machine
•
The hydraulics for the folding and unfolding must be connected to the double-action control
unit.
•
The operator must ensure that during folding and unfolding of the side frames, no person or
animal is within their reach (i.e. at the place of their impact) or vicinity.
•
Perform folding and unfolding on flat and solid surfaces or laterally to the slope with the fully
open control unit.
•
Only perform folding or unfolding with a machine that is lifted on the axle and the side
rubber-tyres of the rollers are recessed, i.e. their piston-rods are retracted.
•
Remove stuck soil from folding points, soil may impair function and cause damage to the
mechanics.
•
During folding or unfolding, check the side frames and have them continuously fold into the
end position to the stoppers.
CAUTION!!! The machine must be lifted on the axle and the side rubber-tyres of the rollers must
be recessed, i.e. their piston-rods must be retracted, when the machine is folded and unfolded.
Otherwise, the wheels on the side rollers may get damaged.
machine prepared for folding
machine prepared for unfolding
CAUTION!!! If the machine has a separate axle, it always has to be lifted on the axle prior to
the start of folding and when folded!
SETTING THE DOWN PRESSURE OF SIDE FRAMES
•
When the machine has been unfolded, the down pressure of the side
frames must be adjusted to ensure optimal terrain tracing.
•
Set the value of 165 bar (2393 Psi) on the pressure gauge using the
circuit for unfolding.
26
|
46
Содержание DISKOMAT 5 PS
