Farm King ALLIED 7420 Скачать руководство пользователя страница 35

Страница: 35 / 82

Operation - Pull Type 7420, 8420

Connecting The PTO Driveline

Stop the engine and leave the operator’s position
(See “Leaving The Operator’s Position” in
Operator’s section).

WARNING

AVOID INJURY OR DEATH

Warnings on the machine and in the manuals
are for your safety. Failure to obey warnings
can cause serious injury or death.

Note:

Clean and grease tractor’s PTO shaft and
PTO driveline coupling each time driveline
is connected.

IMPORTANT

Improper hitch installation can cause PTO
driveline damage.

•

Do not modify the three point hitch.

•

Make sure the PTO driveline is of adequate
length and that u-joints are in the correct phase.

Remove the PTO driveline from the storage
position (if applicable).

Figure 17

Retract the collar (Item 1)

[Figure 17]

and slide the

PTO driveline onto the tractor PTO shaft. Release
the collar and the driveline will lock onto the shaft.
Push and pull the PTO driveline back and forth
several times and make sure it is securely attached
to the PTO shaft.

Install PTO driveline safety chain (Item 2)

[Figure

17]

Note:

The PTO driveline must have a means to
retain it to the PTO shaft on the tractor.

WARNING

•

Do NOT exceed 540 RPM PTO.

•

Keep PTO shields and all guards in place.

•

Keep away from moving parts.

•

Keep bystanders away.

Содержание ALLIED 7420



















































































Результаты поиска

Содержание ALLIED 7420

Отзывы:

Farm King ALLIED 7420, Руководство оператора и каталог запасных частей, Страница: 35 / 82

Результаты поиска

Содержание ALLIED 7420

Отзывы: