Farm King ALLIED 7420 Скачать руководство пользователя страница 27

Страница: 27 / 82

Assembly - Pull Type 7420, 8420

Cutting Edge

Figure 9

Install the cutting edge (Item 1)

[Figure 9]

to the

bottom of the snowblower intake. Attach the
cutting edge using the appropriate hardware.

7420 Models

Nine 3/8” x 1-1/4” flat head socket screws, nine
5/16” flat washers, and nine 3/8” lock nuts (Item 2)

[Figure 9]

8420 Models

Ten 3/8” x 1-1/4” flat head socket screws, ten 5/16”
flat washers, and ten 3/8” lock nuts (Item 2)

[Figure

Discharge Spout

Figure 10

Align the spout spacer (Item 1) on top of the main
frame mount. Align the discharge spout (Item 2)

[Figure 10]

on top of the spout spacer.

Place the four spacers (Item 3) and spout clamps
(Item 4) around the spout ring (Item 5)

[Figure 10]

on the mounts.

Lubricate the spout ring and spout clamps using
multipurpose lithium based grease.

Attach the spacers and clamps to the mounts using
six 3/8” x 1-3/4” bolts (Item 6), sixteen washers
(Item 7), and eight nuts (Item 8)

[Figure 10]

Use two 3/8” x 1-1/2” bolts at the two holes (Item
9)

[Figure 10]

closest to the motor mount.

Содержание ALLIED 7420



















































































Результаты поиска

Содержание ALLIED 7420

Отзывы:

Farm King ALLIED 7420, Руководство оператора и каталог запасных частей, Страница: 27 / 82

Результаты поиска

Содержание ALLIED 7420

Отзывы: