Farm King ALLIED 7420, Руководство оператора и каталог запасных частей

Страница: 26 / 82

Assembly - Pull Type 7420, 8420
22
Three Point Hitch
Figure 7
Align the left and right lower hitch mounts (Item
1) to the left and right hitch tubes (Item 2)
[Figure
7] . Attach with two 3/4” x 4-1/2” bolts and 3/4” lock
nuts.
Align the left and right upper hitch mounts (Item
3) to the lower hitch mounts (Item 1). Attach to the
lower mounts using two 3/4” x 5” bolts and 3/4”
lock nuts. Attach the upper hitch mounts using one
3/4” x 3-1/2” bolt (Item 5)
[Figure 7]
, bushing, and
3/4” lock nut.
Attach a top link pin (Item 4) [Figure 7] , bushing,
and link pin to the top mount.
Figure 8
Attach the top brace (Item 1) to the main body
using one 3/4” x 4-1/4” clevis pin and cotter pin.
Attach to the upper hitch mount using one 3/4” x
3-1/2” bolt and 3/4” lock nut (Item 2)
[Figure 8] .
Driveline Bearing Mount
Figure 5
Align the bearing mount bar (Item 1) with the left
and right hitch tubes (Item 2). Attach using 1/2” x
4-1/2” hex bolts (Item 3)
[Figure 5] , square washers,
1/2” flat washers, and 1/2” lock nuts.
Slide the bearing (Item 4) onto the driveline (Item
5)
[Figure 5] . Attach the bearing to the bottom of
the mount bar using two 5/8” x 3-1/2” hex bolts,
5/8” flat washers, and 5/8” lock nuts.
Attach the PTO shield (Item 6) [Figure 5] to the
mount bar using two 1/4” x 1/2” hex bolts, two
1/4” flat washers, and two 1/4” lock nuts.
Figure 6
Attach the debris shield (Item 1) [Figure 6] to the
top of the main body using two 3/8” x 1” carriage
bolts, 3/8” flat washers, and 3/8” lock nuts.
1
2
1
2
5
1
4
3
2
5
6
3
4
1