Farm King ALLIED 7420 Скачать руководство пользователя страница 33

Страница: 33 / 82

Operation - Pull Type 7420, 8420

Pre - Operation Checklist

Before operating the snowblower for the first time
and each time thereafter, check the following items:

1. Lubricate the equipment per the schedule outline in

the Maintenance Section.

2. Check the snowblower hitch for damaged, loose or

missing parts. Repair as needed before operation.

Note:

Do not operate with leaks.

3. Make sure that all guards and shields are in place,

secured and functioning as designed.

4. Check condition of all hydraulic components for

leaks. Repair as required.

WARNING

HIGH PRESSURE FLUID HAZARD

Leaking fluids under pressure can enter the skin
and cause serious injury or death. Immediate
medical attention is required. Wear goggles.
Use cardboard to check for leaks.

Note:

Do not operate with hydraulic leaks.

6. Check that all electrical connections are tight.

7. Check the augers. Remove any twine, wire or other

material that has become entangled.

Entering The Operator’s Position

Enter the operator’s position, start the engine, and
release the parking brake.

IMPORTANT

Follow the instructions in your tractor’s
operation manual for the correct procedure.

Leaving The Operator’s Position

Always perform the following steps when leaving
the operator’s position:

WARNING

AVOID INJURY OR DEATH

Before you leave the operator’s position:

•

Always park on a flat level surface.

•

Place all controls in NEUTRAL.

•

Engage the park brake.

•

Stop the engine and remove the key.

•

Wait for all moving parts to stop.

Tractor Requirements

The tractor must satisfy the following requirements,
depending on model.

7420 Models:

• 40 - 70 HP w/ Cat. II hitch

8420 Models:

• 60 - 90 HP w/ Cat. II hitch

Содержание ALLIED 7420



















































































Результаты поиска

Содержание ALLIED 7420

Отзывы:

Похожие инструкции для ALLIED 7420

Бренды по названию

Популярные бренды

Farm King ALLIED 7420, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание ALLIED 7420

Отзывы:

Похожие инструкции для ALLIED 7420

Бренды по названию

Популярные бренды