Farm King 1684 Скачать руководство пользователя страница 60

Страница: 60 / 158

Maintenance - 1684, 16104, 16124 Backsaver Auger

4168 Upper Gearbox

Figure 53

Remove the fill / drain plug (Item 1) from the
gearbox. Oil level should be at the bottom of the
plug hole

[Figure 53]

If the oil level is low, add SAE 75W-90 synthetic
gear oil until the oil is at the bottom of the hole.

Changing Gear Oil

Remove the fill / drain plug (Item 1) and siphon all
the gear oil from the gearbox

[Figure 53]

Fill with SAE 75W-90 synthetic gear oil to the
bottom of the plug hole. Install fill / side plug.

Cleaning And Inspection

NOTE:

Inspect the driveline components, replace
all damaged or worn components.

Use solvent to clean the shaft and tube. Use
compressed air to dry and remove excess solvent
from the parts.

Apply a light coat of grease to the shaft and the
tube end.

Use solvent to clean the slide collars, yokes,
crosses and bearings. Use compressed air to dry
the parts.

Apply a light coat of grease to the inside of the
slide collars.

Содержание 1684































































































































































Результаты поиска

Содержание 1684

Отзывы:

Farm King 1684, Руководство оператора и каталог запасных частей, Страница: 60 / 158

Результаты поиска

Содержание 1684

Отзывы: