manualshive.com logo in svg

Farm King 1684, Руководство оператора и каталог запасных частей, Страница: 29 / 158

Поделиться
Скачать
Farm King 1684 Скачать руководство пользователя страница 29

Operation - 1684, 16104, 16124  Backsaver Auger

27

Tractor And Gas Engine Requirements

WARNING

Do NOT exceed 1000 RPM PTO

Keep PTO shields and all guards in place.

Keep away from moving parts.

Keep bystanders away.

The tractor / tow vehicle must be rated for the listed 
weight to transport the specified auger model.

Hitch weight and total weight of the auger models:

Auger 

Model

Hitch Weight

Total Weight

1684

2,460 lb (1,115 kg)

11,000 lb (4,994 kg)

16104

2,460 lb (1,115 kg)

16,500 lb (6,120 kg)

16124

3,810 lb (1,728 kg)

23,010 lb (10,437 kg)

Minimum HP (1000 RPM PTO):

Auger 

Model

Minimum 

Tractor HP

1684

150 HP

16104

175 HP

16124

250 HP

The tractor must be equipped with:

•  20-spline 1-3/4” PTO shaft

•  Three auxiliary hydraulic functions

•  Category IV rated drawbar

•  7-Pin electrical connection

Drawbar Adjustment

Figure 4

Adjust the tractor’s drawbar in / out, until the center 
of the hitch pin hole (Item 1) is 16 inches (410 mm) 
from the end of the tractor’s PTO shaft. See your 
tractor’s owner’s manual for correct adjustment 
procedures 

[Figure 4]

.

NOTE: 

A tractor hitch of less than 16” minimum 
will result in PTO bottoming out, when 
operating auger at maximum height.

Figure 5

The distance between the tractor and the auger 
PTO shaft should be between 36 - 38 in. (914 - 965 
mm) with the tractor and auger on level ground 
and the auger in full down position. This distance 
is obtained by either adjusting the tractor hitch, 
the auger hitch or both 

[Figure 5]

.

1

16”

(410 mm)

36” - 38”

(914mm - 965 mm)

Содержание 1684































































































































































Отзывы:

Нет отзывов