Farm King 1684 Скачать руководство пользователя страница 42

Страница: 42 / 158

Operation - 1684, 16104, 16124 Backsaver Auger

Figure 23

Move the belly dump unit forward until the rear
compartment is directly over the hopper (Item 1)

[Figure 23]

WARNING

AVOID INJURY OR DEATH

Do NOT exceed 1000 RPM PTO.

Keep PTO shields and all guards in place.

Keep away from moving parts.

Keep bystanders away.

With tractor running at a low idle, engage the
tractor PTO slowly to start the auger. Increase
engine RPM (do not exceed 1000 RPM PTO speed).

Slowly open the compartment gate.

Adjust gate until the hopper augers and intake
auger can move grain to the main auger without
overflowing the hopper.

When the rear compartment is empty, close the
gate, disengage the PTO and lower engine RPM
speed.

Figure 24

Move the belly dump unit back until the front
compartment is directly over the hopper (Item 1)

[Figure 24]

With tractor running at a low idle, engage the
tractor PTO slowly to start the auger. Increase
engine RPM (do not exceed 1000 RPM speed).

Slowly open the compartment gate.

Adjust gate until the hopper augers and intake
auger can move grain to the main auger without
overflowing the hopper.

When the front compartment is empty, close the
gate, disengage the PTO and lower engine RPM
speed.

Move the hopper in the desired position away
from vehicle traffic.

Disengage the tractor hydraulics and exit the
tractor.

Содержание 1684































































































































































Результаты поиска

Содержание 1684

Отзывы:

Farm King 1684, Руководство оператора и каталог запасных частей, Страница: 42 / 158

Результаты поиска

Содержание 1684

Отзывы: