manualshive.com logo in svg

Farm King 1684, Руководство оператора и каталог запасных частей, Страница: 18 / 158

Поделиться
Скачать
Farm King 1684 Скачать руководство пользователя страница 18

Safety - 1684, 16104, 16124  Backsaver Auger

16

FIRE PREVENTION

Maintenance

•  The machine and some equipment have components 

that are at high temperatures under normal operating 
conditions. The primary source of high temperatures 
is the engine and exhaust system. The electrical 
system, if damaged or incorrectly maintained, can 
be a source of arcs or sparks.

•  Flammable debris (leaves, straw, etc.) must be 

removed regularly. If flammable debris is allowed to 
accumulate, it can cause a fire hazard. Clean often 
to avoid this accumulation. Flammable debris in the 
engine compartment is a potential fire hazard. 

•  All fuels, most lubricants and some coolant mixtures 

are flammable. Flammable fluids that are leaking 
or spilled onto hot surfaces or onto electrical 
components can cause a fire.

Operation

•  The Farm King machine must be in good operating 

condition before use.

•  Check all of the items listed on the service schedule 

under the 8 hour column before operation. (See 
Maintenance section)

•  Do not use the machine where exhaust, arcs, sparks 

or hot components can contact flammable material, 
explosive dust or gases.

Fire Extinguishers

•  Know where fire extinguishers and first aid kits 

are located and how to use them. Inspect the fire 
extinguisher and service the fire extinguisher 
regularly. Obey the recommendations on the 
instructions plate.

Electrical

•  Check all electrical wiring and connections for 

damage. Keep the battery terminals clean and tight. 
Repair or replace any damaged part or wires that 
are loose or frayed. Battery gas can explode and 
cause serious injury. Do not jump start or charge a 
frozen or damaged battery. Keep any open flames or 
sparks away from batteries. Do not smoke in battery 
charging area.

Hydraulic System

•  Check hydraulic tubes, hoses and fittings for damage 

and leakage. Never use open flame or bare skin to 
check for leaks. Hydraulic tubes and hoses must be 
properly routed and have adequate support and 
secure clamps. Tighten or replace any parts that 
show leakage. Always clean fluid spills. Do not 
use gasoline or diesel fuel for cleaning parts. Use 
commercial nonflammable solvents.

Fueling

•  Stop the engine and let it cool before adding fuel. No 

smoking! Do not refuel a machine near open flames 
or sparks. Fill the fuel tank outdoors.

Welding And Grinding

•  Always clean the machine and equipment, disconnect 

the battery, and disconnect the wiring from the 
machine controls before welding. Cover rubber 
hoses, battery and all other flammable parts. Keep 
a fire extinguisher near the machine when welding.

•  Have good ventilation when grinding or welding 

painted parts. Wear dust mask when grinding painted 
parts. Toxic dust or gas can be produced.

•  Dust generated from repairing nonmetallic parts 

such as hoods, fenders or covers can be flammable 
or explosive. Repair such components in a well 
ventilated area away from open flames or sparks.

Содержание 1684































































































































































Отзывы:

Нет отзывов