manualshive.com logo in svg

Farm King 1684, Руководство оператора и каталог запасных частей, Страница: 39 / 158

Поделиться
Скачать
Farm King 1684 Скачать руководство пользователя страница 39

Operation - 1684, 16104, 16124  Backsaver Auger

37

AUGER OPERATION

Hopper Operation

CAUTION

Never operate the winch or hopper mover when 
the PTO is engaged.

Enter the tractor and start the engine.

Engage the hydraulic circuit for the hopper / winch 
control valve on the intake box. Run the tractor 
engine at low idle.

Figure 18

Move the lever (Item 1) to the right (away from the 
hitch) to move the hopper to the right. Move the 
lever to the left (towards the hitch) to move the 
hopper to the left 

[Figure 18]

.

Move the lever (Item 2) to the left (towards the 
hitch) to raise the boom cable (wind cable). Move 
the lever to the right (away from the hitch) to lower 
the boom cable (unwind cable) 

[Figure 18]

.

IMPORTANT

Always maintain a minimum of three wraps of 
cable on the drum of the winch.

Adjusting Flow Control Valve

Figure 19

Turn the knob (Item 1) on the flow control valve 
“IN” to decrease the speed the auger lowers. Turn 
the knob “OUT” to increase the speed the auger 
lowers 

[Figure 19]

.

Loosen the nut (Item 2) and turn the knob all 
the way in (tight). The approximate initial setting 
should be 3-1/2 turns out from the tight position. 
When set, re-tighten nut to set position 

[Figure 19]

.

IMPORTANT

Be sure that the valve is slightly open before 
raising the first time or auger will not lower.

1

2

1

2

Содержание 1684































































































































































Отзывы:

Нет отзывов