Farm King 1684 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 158

Farm King 1684 Скачать руководство пользователя страница 32

Operation - 1684, 16104, 16124 Backsaver Auger

30

Hitching 16124 Model Auger

Make sure that bystanders, especially small
children, are clear of the working area.

Be sure that there is sufficient room and clearance
to back up to the machine.

WARNING

Before moving the tractor, look in all directions
and make sure no bystanders, especially small
children are in the work area. Do not allow anyone
between the tractor and the equipment when
backing up to the equipment for connecting.

Move the tractor backwards, aligning the drawbar
with the auger hitch.

If the auger hitch needs to be adjusted, stop the
tractor when drawbar is just in front of the auger
hitch.

Stop the tractor and leave operator’s position.

Connect the hydraulic hoses from the hitch cylinder
to the tractor remote couplers.

Enter the operator’s position.

Operate the proper tractor hydraulic control to
raise the auger hitch high enough to allow tractor
drawbar to be aligned with auger hitch. Lower
auger hitch onto drawbar hitch.

Install the hitch pin and retaining pin to securely
fasten the Backsaver Auger hitch to the tractor
drawbar.

NOTE:

Always use a hitch pin of adequate size
and strength and a retaining pin with a
locking device.

Attach the safety chain around the drawbar.

Figure 9

Act on hydraulic controls to raise the auger hitch
high enough to move the auger stand. Remove
auger stand locking pin (Item 1)

[Figure 9]

.

Figure 10

Rotate auger stand (Item 1) upward into storage
position and install auger stand locking pin (Item
2)

[Figure 10]

.

1

2

1

«
...
30
31
32
33
34
...
»

Содержание 1684































































































































































Отзывы:

Нет отзывов