DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
April 2014
Page 59
Window Tab
Procedure
Select the
Magnetic Track Selection
option to specify which
track is to be configured through the Magnetic Track Options.
This applies if the application being used requires customization
of the standard ISO encoding process.
4.10.1.2 Custom Encoding or Raw Binary Encoding Mode
You can change the Magnetic Track options for Tracks 1, 2 and 3 when using the Raw Binary
Encoding mode or Custom Encoding mode. These options are not available for ISO or JIS II
encoding.
Window TAB
Procedure
For Raw Binary Encoding mode, select
4 Bits
to change the bits per
character to 4 BPC.
Note:
This is the default for Track 1.
For Custom Encoding mode, select
5 Bits
to change the bits per
character to 5 BPC.
Note:
This is the default for Tracks 2 and 3.
For Custom Encoding mode, select
7 Bits
to change the bits per
character to 7 BPC.
Note:
This is the default for Track 1.
For Raw Binary Encoding mode, select
8 Bits
to change the bits per
character to 8 BPC.
Note:
This 8-bit setting is the default for all tracks 2 and 3.
Select
NULL
to change the ASCII Offset to NULL.
Select
SPACE
to change the ASCII Offset to SPACE.
Note:
This is the default for Track 1.
Select
ZERO
to change the ASCII Offset to ZERO.
Note:
This is the default for Tracks 2 and 3.
Select
75 BPI
to change the bits per inch to 75 BPI.
Note:
This is the default for Track 2.
Select
128 BPI
to change the bits per inch to 128 BPI.
Select
210 BPI
to change the bits per inch to 210 BPI.
Note:
This is the default for Tracks 1 and 3.
Select
Custom BPI
, which enables the custom BPI text box.
Note:
The lower limit is 75 and upper limit is 210.
Select
No LRC
to change the LRC Generation to none.
Select
Even Parity
to change the LRC Generation to Even Parity.
Note:
This is the default for all tracks.
Select
Odd Parity
to change the LRC Generation to Odd Parity.
