DTC4500e_User Guide_EN, PLT-01669, Rev. 1.1
Page 70
April 2014
4.14
Defined Area
The
Defined Area
option can be used with the
K Panel Resin
or the
Overlay / Print Area
tabs to
define one or more specific areas.
In the samples, the defined area is indicated by the dashed outline.
Method for Defining a Single Area
Step Procedure
1
On the Overlay / Print Area or K Panel Resin tab, select Defined Area(s).
2
Print a card and look at it in the same orientation as when it exits the printer.
3
Measure the total size of the area and enter the dimensions into the dimension boxes.
4
Measure from the lower-left corner of the card to the lower-left corner of the defined area
and enter the values into the X and Y boxes.
Method for Defining Multiple Areas
Step Procedure
1
On the Overlay / Print Area or K Panel Resin tab, select Defined Area(s).
2
Print a card with a defined area and look at it in the same orientation as when it exits the
printer.
3
Measure the defined area location based on the printed card.
4
To define another area, click the Defined Area up-arrow.
5
Use the Defined Area arrows to navigate back and forth from area to area.
