Far south networks Com.X Скачать руководство пользователя страница 189

Страница: 189 / 211

Com.X Administrator Guide

Page 189

sudo ip route add x.x.x.x/24 dev eth1

Ensure the script is executable:

sudo chmod +x /etc/network/ifup.d/staticroutes

Restart the interface or alternatively the Com.X:

sudo ifdown eth<N> && sudo ifup eth<N>

Note: It is not recommended to have more than one default route
in the Com.X routing table.

6.11 Booting the Com.X in recovery mode

6.11.1 Booting in recovery mode

Using the serial console cable, while GRUB is loading, press escape and select
recovery mode and select “Drop to the root shell prompt”.

From the root recovery shell, perform the necessary tasks, such as scanning and
fixing hard drive problems, or resetting the comma user password.

Once completed, reboot the system, enter the BIOS and remove the USB drive from
the boot priority list.

6.12 Third Party Modules

Please note that Far South Networks does not actively support third party
modules and installations.

Note: third party configurations and data may not be backed up by the Com.X
backup utility.

6.13 Telephone Management Systems (TMS)

6.13.1 MAN 3000

6.13.1.1 Installing MAN 3000 support

The Com.X supports logging of call records to a MAN 3000 buffer across ethernet.

To enable support for MAN 3000 on a Com.X unit, from the shell, install the
MAN3000 support package:

sudo aptitude install commaman3000

For Man3000 releases prior to 11.02:

Install the TCPIP2MAN3000 software on the MAN3000 Windows platform from:

C:\Program files\Man3000\App Feature Installation\Install_TCPIP2MAN3000.exe

Run the TCPIP2MAN3000 software and configure it with the IP address of the
Com.X PBX, using port 8989

For Man3000 releases post 11.02:

2016

Far South Networks

Содержание Com.X




















































































































































































































Результаты поиска

Содержание Com.X

Отзывы:

Похожие инструкции для Com.X

Бренды по названию

Популярные бренды

Far south networks Com.X, Руководство администратора

Результаты поиска

Содержание Com.X

Отзывы:

Похожие инструкции для Com.X

Бренды по названию

Популярные бренды