23
out by the installation company or companies authorised by FANTOZZI.
During the maintenance operations always wear personal protection devices
in accordance with the current safety regulations in relation to the operations
performed. Wear suitable clothing that will not hinder movement and/or get caught up in parts of the
ladder.
5.4 CLEANING
Before carrying out any cleaning operation, disconnect the ladder from the power circuit by pulling out the
plug and/or opening the disconnection device.
The ladder must be cleaned with a non-abrasive moist cloth and neutral detergents. Do not use solvents or
corrosive substances.
6. PROBLEMS - CAUSES – REMEDIES
Problem
Possible causes
Solution
The ladder does not unfold or fold
No power
Restore the power
Circuit board fuse burned
Call Technical Service
Remote control battery flat
Replace the radio control battery
The motor spins
Motor worm screw bushing broken Call Technical Service
Manual release engaged
Check the release lever on the
motor and disengage it
The ladder movements are
irregular or the ladder jams
Foreign bodies between the ladder
mechanisms
Remove the foreign bodies that
obstruct regular movement
Telescopic tubes or handrail
supports bent
Call Technical Service
Trapdoor tie-rods bent
Call Technical Service
The frame is out of square or the
trapdoor has deformed
Call Technical Service
7. DISMANTLING, DEMOLITION AND WASTE DISPOSAL
The dismantling and demolition operations must be carried out by specialised persons that have the
mechanical and electrical skills necessary to work in safe conditions.
IT
ALIANO
ENGLISH
Содержание ACI ALLUMINIO MOTORIZZATA
