Modèle : UV640
8,4 Volts c.c.
Care and Maintenance
To improve the performance and life of your unit, we recommend you do the
following:
1. Once a month clean the unit with a dry cloth, including the chamber which the
dust container fits into. Remove any hair, fiber or other materials that may have
built up in the chamber, on the rotating brush or edging tool.
2. Don’t use abrasive materials to clean the sweeper.
Do not immerse the unit in
water.
3. Do not pick up liquids or use on wet floors.
4. Do not use on concrete, tar or similar rough surfaces .
5. Don’t pick up pieces of string or fabrics with the sweeper.
6. Do not clean tasseled or frayed carpets with the sweeper.
7. Any other servicing should be done by an authorized service representative.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
SWEEPER WILL NOT
OPERATE
1. Batteries discharged.
2.
No power in electrical
outlet supplying charging
adapter.
3.
Unit needs servicing.
1. Charge unit.
2. Check fuse or breaker.
Replace fuse/reset breaker.
3.
Call Customer Service.
SWEEPER WILL NOT
PICK-UP
1.
Dust container is full.
2.
Unit needs recharging.
1.
Empty dust container.
2. Charge unit.
DUST ESCAPING
FROM SWEEPER
1.
Dust container is full.
1.
Empty dust container.
ROTATING BRUSH
WILL NOT PICK UP
1. Unit clogged.
2.
Dust container is full.
1. Check for excessive material
on brush or in bottom of
sweeper. Remove obstruction
from brushes and/or sweeper.
2.
Empty and clean dust
container.
SWEEPER WILL NOT
CHARGE
1.
Electrical outlet not
working
2. Charging Adapter not
working
3.
Batteries no longer
functioning
1.
Check to ensure outlet is
working properly. (Easily
checked by plugging in
another appliance.
2. Replace charging adapter
3.
See battery disposal pg. 8.
10. Coupelle à poussière (réservoir)
11. Prise de chargement
12. Poignée inférieure
13. Tube de rallonge
14. Tube télescopique
15. Poignée supérieure
16. Adaptateur de chargement :
n’utilisez que le TechWorld AD-1215-U8
1. Électrobrosse balayeuse
2. Bouton d’alimentation On/Off
3. Contrôleur de vitesse
4. Témoins de vitesse
5. Témoin de chargement
6. Brosse rotative
7. Couvercle de la brosse
8. Outil à angle
9. Boîtier de vitesse
Les illustrations peuvent différer du produit lui-même.
Avertissement: Les piles de la balayeuse sans fil de modèle
UV640 ne sont pas chargées avant sa sortie
d’usine. L’appareil doit être chargé pendant 20
heures avant la première utilisation. N’utilisez que
les piles de rechange XB617U
.
9
22
1
9
8
6
7
3
2
11
12
13
14
15
16
4
10
5
