24
FRX100 VA S Housing Instruction Manual 20220601
Image #20
e.
During the dive, in order to disable the flash diffuser, the diffuser can be turned clockwise
around the lens port until it reaches a horizontal position and clicks (image #20). This rest‐
point of the diffuser eliminates the need to completely remove it from the housing during
the dive.
4.
It is best to set the camera flash mode to “Flash Always” as artificial light is required in most
compositions for the purpose of color and light reproduction. This will ensure the built‐in camera
flash fires on every image taken regardless of
ambient light available. Please refer to the
camera instruction manual for further
instructions regarding such settings.
5.
Turn the Flash Pop‐Up dial counterclockwise in
order to pop up the camera built‐in flash.
6.
Note that once the camera built‐in flash has
been popped up, it can be disabled again using
the
Flash / Right
control and selecting “flash
disabled” on the flash mode menu. Turning the
Flash Pop‐Up control clockwise will not have any
effect on the built‐in flash.
When shooting in M (Manual), A (Aperture priority) or S (Shutter Speed priority) shooting modes,
please take into consideration that once the flash has been popped up – it cannot be disabled.
Therefore, in such cases, it's recommended to switch to Auto shooting mode to eliminate the flash
after it has been popped up.
