16
FRX100 VA S Housing Instruction Manual 20220601
Image #6
OPENING THE HOUSING
1.
Pull the small red tab located at the bottom of the latch dial outwards (up and away from the
housing), as indicated by the arrow direction (image #5). There is no need to apply any force.
2.
While holding the lock dial up, turn the latch dial counterclockwise until the red latch tab is
located at the top of the latch and cannot be turned any further (image #6). There is no need to
apply any force.
3.
Carefully open the back side of the housing.
4.
Note that when opening the housing for the first time or when opening it after airplane trips,
increased resistance might be encountered.
Therefore, it is important not to lock the housing
and to leave it slightly open when transporting by air
.
Prior to opening a vacuumed housing, the vacuum should be released
using the Vacuum Valve. For further instructions, please refer to the
section “Fantasea Hybrid Vacuum Safety System”.
Important Notice
Image #5
