Fanotec MECHA C1, Руководство пользователя

Страница: 99 / 122

99
MECHA User’s Guide v.06 ‒ Dual Axis
© 2021 FANOTEC
Step 2
1. Power off both MECHA units in case they are running. To do that, hold
down the power button,
P
, for 3 to 5 seconds.
2. Power on the horizontal MECHA (hold down the power button,
P
, for 3
to 5 seconds). Wait until the splitting lights (
-=-=-=
) end and all LEDs
are off. The unit powered up first rotates horizontally , so we name it
MECHA-H .
3. Enter the power code on the MECHA-H using the MECHA-H buttons.
After entering the code, MECHA-H gives 5 beeps, if not muted in settings.
That means " I'm ready, another unit can pair to me ".
4. Power on the other MECHA using its power button,
P
, and wait until
the splitting lights (
-=-=-=
) end and all LEDs are off. The second
powered up unit rotates vertically , so we name it MECHA-V .
As an alternative to „Wait until splitting lights end”, on steps 2 an 4, you can
press the
1
button when the LEDs show
-=-=-=
.
5. Enter the same power code on the MECHA-V using the buttons of
MECHA-V. After entering the code, MECHA-V gives 2 beeps, if not muted
in settings. That means " I'm done, I'm the pair of MECHA-H ".
On successful pairing, MECHA-H has the middle LED on, and MECHA-V has
the two middle LEDs on. Otherwise, power off and on both MECHAs again,
preferably power on the MECHA-H first.
Next step is to test the combo using MECHA’s buttons, and see how it
works.