Fanotec MECHA C1, Руководство пользователя

Страница: 83 / 122

83
MECHA User’s Guide v.06 ‒ Dual Axis
© 2021 FANOTEC
1. Tap/click the [Save] button to save the preset with a different name, or
with the same name if it is a presets that can be overwritten.
The preset name can be preceded by a power code of maximum 7 digits.
This feature also allows you to execute the preset using MECHA’s
buttons. For example, if the preset name is 01 C1 6 shots :
○ use
P1>
to execute the preset to the right,
○ use
P1<
to execute the preset to the left.
Preset Power Code
2. Tap/click the [Save 1] button to overwrite the preset with the name
Button 1 , assigned to the
1
button.
3. Tap/click the [Save 2] button to overwrite the preset with the name
Button 2 , assigned to the
2
button.
4. Tap/click the [Save 3] button to overwrite the preset with the name
Button 3 , assigned to the
3
button.
Now the new preset is saved and displayed in the Presets list and ready to be
used in the future.
Create a preset power code as follows:
● the first digit must be 0 (zero) (remember that every power code
starts with zero)
● the next sequence of maximum six digits must be a combination
of the digits 1 , 2 , or 3 , so that two identical digits are not in
consecutive positions.
Example: 01, 023, 0123, 02123, 0123123 etc.