Fanotec MECHA C1, Руководство пользователя

Страница: 60 / 122

60
MECHA User’s Guide v.06 ‒ Dual Axis
© 2021 FANOTEC
Power on and Test – MECHA DAC
The long press of the power button is only necessary at power on/off. In
all other cases, use a normal press.
Assuming that the controllers and rotators are mounted as shown in the
installation image above, without the camera , let's perform a test
panorama consisting of 3 rows, 12 photos per row:
○ Press the following buttons on MECHA-H, then wait for the
movement to stop:
1312>
Power on MECHA DAC:
● First, press the
P
button of MECHA-H for 3 to 5 seconds (long
press).
● Then, press the
P
button of MECHA-V for 3 to 5 seconds (long
press).
It may take about 35-45 seconds to start, as in the case of MECHA
Single Axis.
📹
https://youtu.be/wdovZA3IlOQ
Power ON and test - MECHA Dual Axis Combo
Power off MECHA DAC the same way you power it on:
● Press the
P
button of MECHA-H for 3 to 5 seconds (long press).
● Press the
P
button of MECHA-V for 3 to 5 seconds (long press).
The order in which you power off MECHA units is not important.