Fanotec MECHA C1, Руководство пользователя

Страница: 101 / 122

101
MECHA User’s Guide v.06 ‒ Dual Axis
© 2021 FANOTEC
Automatic Pairing Using the UI
Power on horizontal MECHA and press
1
when LEDs shows splitting lights
( - = - = - = - = ).
1. Connect to horizontal MECHA with MECHA SSID and password. Refer to
MECHA Controller C1 Manual if needed. SSID and password are printed
on the supplied QR code label. Record them if the label is not available.
2. Open 192.168.8.1/config
3. Select Default Mode : [AP+STA]
4. Click the [Apply] button.
5. Power on vertical MECHA and press
1
when LEDs shows splitting lights
( - = - = - = - = ).
6. Connect to vertical MECHA with MECHA SSID and password.
7. Open
192.168.8.1/config
8. Select Default Mode : [STA]
9. Click the [Apply] button.
10. Click the [Connect to Wi-Fi] button, enter SSID and password for
horizontal MECHA.
11. Connect to horizontal MECHA again using MECHA SSID.
12. Access
192.168.8.1/row
If pairing is successful, UI will show [H] at the upper left corner and [Team
.x] near the bottom of page, where x is the last part of the IP in
192.168.8.x. The vertical MECHA can be accessed by selecting the [H] icon
or by typing 192.168.8.x on browser address. Vertical MECHA UI will show
[V] at the upper left corner and [Team] near the bottom of page. Select [V]
to go back to horizontal MECHA. Use 2 Tabs with MECHA IPs in browser
to access both MECHAs quickly.
User: admin
Password: Mecha
User: admin
Password: Mecha