Fanotec MECHA C1, Руководство пользователя

Страница: 45 / 122

45
MECHA User’s Guide v.06 ‒ Single Axis
© 2021 FANOTEC
Rotator Settings
Rotator — Set the rotator in use by selecting an option from the list, or using
the following codes: 23131< for E1, 23132< for E2, and 23121< for P1.
Inverted — Check this checkbox if, for a particular reason, the rotator needs
to have all its movements in the opposite sense of rotation, for example
when mounted under a turn table.
Backlash — If the value needs to be entered manually instead of using the
automatic procedure, for E1 and E2 rotators it is around 21 (33 in our
example), and for P1 rotator the value is 0 (zero). It is recommended to use
the automatic procedure for a better result, if the conditions to detect the
small movements are met. Please see the code 12321< (Backlash
compensation calibration) for more details.
Buzzer PWM and Start Page
Buzzer PWM values — Range from 1 to 255, and do not necessarily refer to
the sound loudness. We recommend that you try a few values to find your
preferred value.
Start Page — Can be New , Row , or Ring , and can also be set on these pages.
IR Settings and more
Use local CAM and AUX ports only — Check this checkbox if you want to
connect camera to the horizontal unit in Dual Axis Combo. This means faster
communication between MECHA and camera. Note that the camera cannot
be connected to the vertical unit while this setting is active.