Figure 28
4.
The remote buttons instruct as below:
I = minimum speed II = low speed
III = medium low speed IV = medium speed
V = medium high speed VI = high speed
Button:
This button turns the fan off.
Reverse button (back of remote):
This button is to control fan direction.
Down Light button:
The button is to control light, Infinite light levels
are available by holding the light on/off button
(Figure 28).
Up Light button /
Fan speed:
How to Operate Your Ceiling Fan (Cont’d)
Figure 29
Code Switches
Reverse
Button
13
5.
“D” and “ON” dip switch:
The “ON” selection is the light dimmable selection and is to
be used with all bulbs other than CFL. The “D” selection is
the light on only (no dimming function) and is to be used
with CFL bulbs (as CFL bulbs cannot be dimmed). The
receiver provides the following protective function:
(Figure 29)
Lock position: The DC motor has a built-in safety feature
against blade obstruction against obstruction during
operation. If something obstructs the fan blades the motor
will stop operating after 30 seconds of interruption. Please
remove obstacles and reset.
Over 80W protection: When the receiver detects motor
power consumption which is greater than 80W, the
receiver power will shutdown and fan operation will cease.
Disconnect the power supply and after 5 seconds return-
power on to the fan.
